✦ Spedizione gratuita in Italia ✦
Waveshare 1.51inch Transparent OLED 128×64 Resolution Light Blue Color Display Compatible with Raspberry Pi Embedded Independent Driver Chip, Using SPI/I2C Interfaces
Waveshare 1.51inch Transparent OLED 128×64 Resolution Light Blue Color Display Compatible with Raspberry Pi Embedded Independent Driver Chip, Using SPI/I2C Interfaces
Waveshare 1.51inch Transparent OLED 128×64 Resolution Light Blue Color Display Compatible with Raspberry Pi Embedded Independent Driver Chip, Using SPI/I2C Interfaces
Waveshare 1.51inch Transparent OLED 128×64 Resolution Light Blue Color Display Compatible with Raspberry Pi Embedded Independent Driver Chip, Using SPI/I2C Interfaces
Waveshare 1.51inch Transparent OLED 128×64 Resolution Light Blue Color Display Compatible with Raspberry Pi Embedded Independent Driver Chip, Using SPI/I2C Interfaces
Waveshare 1.51inch Transparent OLED 128×64 Resolution Light Blue Color Display Compatible with Raspberry Pi Embedded Independent Driver Chip, Using SPI/I2C Interfaces
Waveshare 1.51inch Transparent OLED 128×64 Resolution Light Blue Color Display Compatible with Raspberry Pi Embedded Independent Driver Chip, Using SPI/I2C Interfaces
Waveshare 1.51inch Transparent OLED 128×64 Resolution Light Blue Color Display Compatible with Raspberry Pi Embedded Independent Driver Chip, Using SPI/I2C Interfaces
Thumbnail
Thumbnail
Thumbnail
Thumbnail
Thumbnail
Thumbnail
Thumbnail
Thumbnail

Waveshare 1.51inch Transparent OLED 128×64 Resolution Light Blue Color Display Compatible with Raspberry Pi Embedded Independent Driver Chip, Using SPI/I2C Interfaces

7.50 30.99
Save 76%
🔥 people are purchasing this right now!
30-Day Risk-Free Returns & Money-Back Guarantee
⚡ Low Stock: Only items left!
Successfully added to your bag!

Product Overview

- Provide online user manual, please check the manual and our wiki carefully before using!
- OLED transparent module, full viewing angle.
- Adopts 4-wire SPI and I2C interface, better compatibility, fast data rate.
- There are two driver interfaces on the OLED module: 4-wire SPI and I2C interfaces respectively. Two resistors can be soldered on the back of the module. The corresponding communication mode can be selected through the selection of resistors.
- The program defaults to SPI mode. If you need to switch the mode, please modify DEV_Config.h. For details, please refer to the program description - bottom hardware interface - interface selection.

Utilizziamo i cookie per migliorare la tua esperienza. Cliccando su «Accetta» accetti la nostra Informativa sulla privacy.